BDX PnP

 

ARF Kit Includes:

• Hardware
• Linkages
• High-Flow Fuel Fittings
• 6.0L Fuel Cell
• Stainless dual wall thrust pipe
• JP ER200 Electric landing gear or optional Electron landing gear with GS 200
• Standard wing, vertical and horizontal stabilizer covers
• Carbon Fiber wing and vertical and horizontal tubes

PNP Kit Includes:

• (8) Pre-installed HV servos with an incredible 500 oz in (36kg) of torque.
• All linkages installed and connected
• 6.0L Fuel cell installed with high-flow fittings and all fuel line ran
• UAT installed
• Wiring completed with MPX connectors and wire loom. Wiring is labeled and run to equipment tray
• Installed Stainless dual wall thrust pipe
• Electron ER 50 landing gear with GS-200 controller or JP ER 200 Electric landing gear installed
• Just add receiver, gyro, turbine and you’re ready to FLY!
• Hardware
• Linkages
• High-Flow Fuel Fittings
• 6.0L Fuel Cell
• Stainless dual wall thrust pipe
• JP ER200 Electric landing gear or optional Electron landing gear with GS 200
• Standard wing, vertical and horizontal stabilizer covers
• Standard wing, vertical and horizontal stabilizer covers
• Carbon Fiber wing and vertical and horizontal tubes

Kit Features:

• Extensive Pre-fabrication
• Painted outside mold with clear coat finish
• Very light all composite sandwich layup
• Center hinged rudder for precise centering and maximum travel
• Two-piece fuselage disassembles easily
• Removable vertical and horizontal stabilizers with one bolt
• Carbon fiber reinforcement throughout
• Carbon fiber wing and spar tubes
• Fuselage, wing, rudder and stab covers
• Diverse speed envelope, highly maneuverable while maintaining outstanding slow speed performance

Pricing:

• Introductory ARF price $9450 AUD (JP landing gear) $9890 AUD (Electron landing gear and GS 200 controller)
• Introductory PNP price $11,190 AUD (JP landing gear) $11,630 AUD (Electron landing gear and GS 200 controller)
• BDX ships via DHL Air for $ POA
• Custom paint schemes available POA
• Prices are subject to change due to international rate changes

Optional Accessories:

• Stainless steel tail cone
• Custom Wire Harness for ARF version
• Smoke tank and smoke hardware
• Large size UAT
• Revoc wing/stab/rudder bags in black, red or grey
• Light sets
• CLI servos
• Kingtech Turbines

BDX Setup Notes

Servo arm lengths:

Aileron 1.5″

Elevator 1.5″

Rudder 1.5″

Flaps 1″

Control Throws:

• Aileron: 12mm (Low Rate) 20mm (High Rate) *Measured from tip of surface*
• Elevator: 10mm (Low Rate) 13mm (High Rate) *Measured from tip of surface*
• Rudder: 75mm plus from base
• Takeoff flaps 25mm from aileron, Landing flaps 90mm from aileron. ** Mix 3-4mm down elevator with full flaps.
• Differential: 10%

Exponential:

• Aileron 25-35%
• Elevator 25-35%
• Rudder 15%