T-27 TUCANO 50CC

An innovative model airplane on the popular 50CC class that surprises by the scales visual details such as antennas, rivets, panel lines, exhausts replicas, pitot tube replicas, main and front landing gear doors (not installed) , hand painted with high quality finishing, scale adhesives according to the chosen paint applied and varnished in the model airplane, and also for the pleasure in flying, since it remains stable in high and low speeds, scale flaps give much realism and stability for landings and slow flights.

Prepared for installation of retracts (supplied separately) pneumatic, mechanical or electrical, a wide variety of equipment can be used. Prepared for installation of scale navigation lights (supplied separately), wing tips and wing landing lights with clear lenses

High-quality epoxy resin model with structural reinforcements, low weight and high strength due to high-tech FULL COMPOSITE vacuum lamination technique. Wing and stabilizer in two pieces (1 aluminum tube in the wing and 1 in the stabilizer) laminated in fiberglass and epoxy resin with reinforcements of carbon fiber and structures in laser cut plywood and balsa wood. Clear canopy and resin canopy frame can be installed with open/close mechanism (not included), resin cockpit with instruments panels and seats replicas. Aileron, flaps, and elevators factory hinged with perfect alignment. Rudder to be installed with hinge points provided with the kit. Servos tray and tank tray in laser cut plywood. Wing and stabilizer servos installed inside the reinforcing ribs, allowing accurate and safe linkage. 2 piece engine cowl provided with no cutouts, making access to adjustments or engine checks and fueling easy. It must be cut in the final assembly according to the position of engine, exhaust and installed accessories. Firewall installed with correct and definitive angles, with center marking. Side door with opening and closing mechanism installed and ready to accommodate on/off switches, fuellers, voltage monitors and other equipment that are installed on the model aircraft.

The indications of the T-27 Tucano 50CC are: Scale Model, for realistic flight reproduction and scale aerobatics, like Cuban eights, slow rolls, 4 point rolls, loopings, split S, etc. Reduced stall speed and smooth flight characteristics guaranteed by Juniaer aerodynamic features. Flaps guarantee lift for a good landing. Check out videos on our You Tube channel!

     SPECIFICATIONS –

     Wingspan – 90.55 in  (2300 mm)

     Length – 80.71 in  (2050 mm)

     Weight – (no accessories): 10.15 lb    (4400 g)  FULL COMPOSITE

     Flying Weight – 22 to 26 lb ( 10 kg to 11.5 kg )

     Engines:

• Gasoline burning (50 a 60 cc)
• Electric Motors (230 kv 5000 W 33.3 V to 55.5 V LiPo )

     Radio – Minimum 7 channels with limited features we recommend 9 or more channels

     Servos – All servos must be metal geared

     Rudder and steering – 1 servo 15 kg or more torque

     Ailerons – 2 servos  Flaps – 2 servos  Elevator – 2 servos 10 kg or more torque

     Throttle – 1 servo (not used with electric motor) 5 kg or more torque

     Choke – 1 servo (optional) Retracts – 1 servo (pneumatic/spring air) or servo less (electric)

     Spinner – 3 1/2″(88,9mm) Wheels – 3 3/4″ to 4″(95,25mm-101,6mm) mains and 3 1/4″(82,55mm) front